Local contractor in 71112

When the customer built a new shop in their backyard, we provided a comprehensive electrical solution by wiring the space. We also installed a generator inlet and interlock kit to ensure reliable power during outages. Additionally, we relocated an outlet for a kiln from one shop to another, enhancing the functionality of the workspace.

During inspection, a broken metal prong was discovered lodged in the hot slot of an electrical outlet in the upstairs bedroom. The prong was carefully removed to eliminate any electrical hazard. After removal, the outlet was thoroughly examined for signs of overheating, arcing, or structural damage. No additional issues were detected, and the outlet is now safe for use.

Some GFCI outlets were malfunctioning, causing the outside plugs to fail. We identified the faulty GFCI and promptly replaced it, ensuring that all outdoor electrical outlets now function properly and reliably.

Installing proper lighting can significantly enhance the ambiance of a kitchen. We installed a stylish light fixture over the kitchen island, ensuring precise placement and secure wiring for both aesthetics and safety. This upgrade not only improved visibility but also added a modern touch to the space.

A screw inadvertently punctured an electrical wire, creating a hazardous situation. We promptly assessed the damage and expertly repaired the affected section, ensuring the electrical system was safe and fully operational once again.

A faulty electrical connection was preventing power from reaching several parts of the home. After diagnosing the issue, we repaired the connection, restoring power effectively. Now, all electrical systems are functioning correctly, ensuring the home runs smoothly again.

Defective GFCIs in the home were replaced to ensure safety and compliance with electrical standards. In addition, a new TV outlet was added to the existing circuit in the bedroom, allowing for a convenient wall-mounted TV setup. This installation enhances both functionality and aesthetics in the living space.

Two ceiling fans were installed to enhance airflow and comfort in the home. One fan required us to install a ceiling fan-rated brace to ensure proper support and safety. We took care to ensure both fans were securely mounted and functioning effectively.

The front porch light was malfunctioning, prompting us to investigate the issue. Upon examining the fixture, we discovered that the internal tab was pressed too far up. We adjusted it accordingly, and now the light functions perfectly.

Upgrading ventilation in bathrooms can significantly improve air quality. We installed new exhaust fans in both the master bath and guest bath, enhancing air circulation and eliminating excess moisture effectively. After the installation, both spaces are now more comfortable and fresh, providing a better experience for daily routines.

To enhance the safety and security around the home, we installed three new flood lights strategically positioned to maximize illumination. This new installation allows for improved visibility during nighttime hours, creating a well-lit environment for the outdoor areas. The flood lights are designed to effectively deter potential intruders while providing peace of mind to the residents.

We conducted a thorough panel inspection to ensure all connections were tight and secure while verifying the voltage levels. This proactive approach helps maintain optimal electrical performance in the home, providing peace of mind for residential customers. Our meticulous attention to detail ensures that every aspect of the electrical panel meets safety standards.

To ensure the jacuzzi tub had the necessary power supply, we installed a new circuit tailored to meet its energy requirements. This involved carefully laying the wiring and connecting it to the main panel, ensuring safety and functionality for the homeowner's relaxation needs. The successful installation provides peace of mind and enhances the enjoyment of the spa experience.

To ensure comfortable cooling in three separate rooms, we installed three new electrical circuits specifically designed for window air conditioning units. This upgrade allows for efficient power distribution, enhancing the home’s climate control capabilities. Each circuit was carefully routed to accommodate the electrical needs, ensuring optimal performance for the installed units.

The switches in guest bath 3 were malfunctioning, causing inconvenience for the homeowners. We replaced the non-working switches with new, reliable units, ensuring proper functionality and enhancing the user experience in their bathroom.

To enhance airflow and comfort in the home, we installed new ceiling fans in multiple rooms. This upgrade not only improved ventilation but also increased energy efficiency, providing a more pleasant environment for everyday living. Each fan was carefully mounted and wired to ensure optimal performance.

An overheated outlet posed a safety risk in the home, prompting us to take action. We carefully inspected the damaged outlet, identified the underlying issues, and completed the necessary repairs to restore safety and functionality. Our focus remained on ensuring the electrical system in the residence operated effectively without further hazards.

A malfunctioning three-way switch was causing inconvenience in the home. We diagnosed the issue and successfully repaired the wiring, ensuring the switch operated correctly. After the fix, the homeowner could easily control the lighting as intended, enhancing their residential experience.

To enhance nighttime visibility and safety, we installed flood lights around the home, effectively lighting up the yard. This installation not only improves security but also adds a welcoming ambiance to the property after dark. The flood lights were strategically positioned to ensure optimal illumination, creating a bright and safe outdoor environment.

The pull-down switch in the ceiling fan stopped functioning, creating inconvenience for the homeowner. We swiftly replaced the faulty switch, ensuring the fan operates smoothly again and saving the customer from the expense of purchasing a new fan.

After a storm caused significant damage to the electrical system, we promptly repaired the issues, restoring power to the home. Our focus was on ensuring a safe and efficient new installation to replace the compromised components, allowing the residents to regain their electricity quickly.

A switch that wouldn’t pass power was causing inconvenience for the homeowner. We identified the malfunction and promptly replaced the faulty switch, restoring full functionality to the electrical system. The issue was resolved efficiently, ensuring the residence was back in working order.

Wires had been cut, disrupting the main feed from a 200 amp outside panel to the inside panel. We repaired the connection, ensuring a safe and efficient flow of electricity throughout the residential property. This service addressed the immediate electrical issue and restored functionality, providing the homeowner with reliable power once again.

A faulty GFCI that wouldn’t reset presented a safety issue in the home. We replaced the defective unit with a new, reliable GFCI, ensuring proper functionality and enhanced electrical safety for the residence. This maintenance work provides peace of mind and protects against potential electrical hazards.

To enhance the lighting and efficiency in the space, we rewired the ceiling fan, installed new circuits, and separated the lighting circuits. We also added stylish new lights in the closets, improving visibility and functionality throughout.

To enhance the functionality of the home, we installed multiple new outlets and created an additional outlet in a new location. This ensured that the homeowner had ample access to power wherever needed, addressing their electrical requirements effectively. Each installation was completed with attention to safety and compliance, providing reliable service for everyday use.

A break in the line was detected by Swepco, necessitating a relocation of the electrical service. We moved the service to the other side of the home and carefully ran new wiring to the sub panel located in the garage, ensuring everything is operational and up to code.

To accommodate the increased electrical needs of the shop, we installed appropriately sized wiring for a 50 amp sub panel. This involved working with Square D components to ensure optimal performance and safety, providing the customer with reliable electrical service for their residential space.

To enhance the ambiance of a residential backyard, we added decorative lighting to the customer's patio. This involved installing energy-efficient LED fixtures strategically to illuminate the space, creating a inviting outdoor atmosphere for evening gatherings and relaxation. The transformation not only improved visibility but also elevated the overall aesthetic of the home’s outdoor area.

To enhance the home’s efficiency, we installed a new ground rod that ensures proper grounding and safety for the electrical system. This installation included careful wiring and connections, providing the homeowner with improved electrical functionality and peace of mind.